TM 9-2320-280-34
4-6. FUEL INJECTION PUMP MAINTENANCE (Cont'd)
6.
Install hose adapter (9) to fuel injection pump (8).
7.
Slide modulator link (12) forward and connect to fuel injection pump (8).
8.
Connect cable clip (13) to modulator link pin (14).
9.
Install accelerator cable mounting bracket (para. 4-10).
10.
Connect throttle return spring (6) to throttle shaft lever (7).
11.
Connect fuel filter outlet hose (11) to hose adapter (9) with clamp (10).
12.
Install kick-down switch (TM 9-2320-280-20).
13.
Install engine oil filler tube (TM 9-2320-280-20).
14.
Install fuel injection lines (para. 4-4), but do not bleed air from lines.
15.
Adjust accelerator linkage (TM 9-2320-280-20).
_AUT_ON
C __ I __
Do not operate starter continuously for more than 20 seconds, wait
10 to 15 seconds between periods of operation. Failure to do so will
result in damage to the starter.
16.
Crank engine until fuel exits from check valve (4) on fuel injection pump (8).
17.
Connect fuel drain back hose (1) to check valve (4) with clamp (2).
18.
Connect leads 54A (3) and 569B (5) to fuel injection pump (8).
19.
Secure leads 54A (3) and 569B (5) with tiedown strap (3.1).
4-12
Change 1
