TM 9-2320-280-34
3-26. ENGINE PREPARATION (6.2 L AND 6.5 L) (Cont' )
d
CAUTION
When using front eyelet on lifting sling, engine oil pan must be
supported during engine installation to prevent rear eyelet of
lifting sling from damaging windshield.
NOTE
Hoist must be attached to:
Forward eyelet of lifting sling when lifting engine on M996,
M996A1, M997, and M997A1 for 6.2 L.
Forward eyelet of lifting sling when lifting engine on M997A2 for
6.5 L.
Intermediate eyelet when lifting engine on all other models.
Rear eyelet when lifting engine and transmission together.
Sling bracket must be installed on rear of engine.
61.
Install sling bracket (38) on left cylinder head (39) with two capscrews (37).
62.
Install engine lifting sling (35) on right cylinder head (41) with two capscrews (40).
63.
Install pin (36) and sling bracket (38) on engine lifting sling (35)
3-201
