TM 9-2320-266-34
(14) Remove the main metering jets (figure 12-7).
Figure 12-7. Removing or Installing the Main Metering Jets.
(15) Remove the venturi cluster screws to lift the
venturi cluster and gaskets up and away from the main body
Figure 12-5. Removing or Installing the Air Horn.
(13) Lift out the float retainer and baffle. Remove the
floats and pin (figure 12-6).
Figure 12-8. Removing or Installing the Venturi Cluster.
(16) Remove the accelerator pump discharge and
intake check balls.
Figure 12-6. Removing or Installing the Float Assembly.
(17) Remove the plastic limiter caps from the idle
mixture screws. Remove the screws and springs from the
throttle body.
(18) Remove the screws and separate the throttle body
from the main body.
12-3
