APPENDIX F GPFU INSTALLATION (M1010)

E-30. WINTERIZATION KIT CARGO COMPARTMENT HEATER CIRCUITS (M1008 AND M1008A1)

F-1 . GAS-PARTICULATE FILTER UNIT (GPFU) INSTALLATION (M1010) (Cont).

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
959

TM 9-2320-289-34 APPENDIX F GPFU INSTALLATION (M1010) F-1. GAS-PARTICULATE FILTER UNIT (GPFU) INSTALLATION (M1010). This task covers: a . Installation INITIAL SETUP: Equipment Condition Materials/Parts l Both battery negative cables disconnected. l Pipe sealant (See TM 9-2320-289-20) Tools/Test Equipment l Snapring pliers (Item 61, Appendix B) NOTE Some parts required for this installation are provided with the M1010, and some components must be ordered through the supply system. The task should not be attempted until all components required are available. a . INSTALLATION NOTE l All holes for mounting various items have been factory-drilled. When mounting any item, look for predrilled holes in areas indicated. l Ensure that pipe sealant is applied to all threaded pipe fittings. 1. Remove screw and disconnect ground lead from upper left front corner of patient compartment. Save ground lead and screw for later use. F-1

Privacy Statement
Press Release
Contact