TM 9-2320-289-34
10-24. AIR CONDITIONER COMPRESSOR MAINTENANCE (M1010) (Con’t).
d.
ASSEMBLY
CAUTION
DO NOT strike end of shaft (27) during assembly of compressor. Failure to
follow this caution may result in damage to compressor internal
components.
1.
Install new preformed packing insert
(45) and new felt seal (44) on front
head (46). Install snapring (43) in
groove. Install sleeve seal retainer
(42) .
2.
Install front head (46) in compressor
shell (29). Install new “O” ring (47) in
groove in compressor shell (29).
3.
Gently and evenly press valve plate
(48) into compressor shell (29).
Gently and evenly press valve reed
(49) over valve plate, ensuring that it
is positioned the same way as it was
removed.
4 .
Press
suction
cover
(41 ) onto
cylinder housing assembly (40).
5.
Install cylinder housing assembly (40)
in compressor shell (29).
6.
Gently and evenly press valve reed (30) into compressor shell (29). Gently and evenly press
valve plate (31) over valve reed, ensuring that it is positioned the same way as it was
removed. Press oil pump assembly (32) onto end of shaft (27).
TA50458
10-95
