10-24. AIR CONDITIONER COMPRESSOR MAINTENANCE (M1010) (Cont)

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
868

TM 9-2320-289-34 10-24. AIR CONDITIONER COMPRESSOR MAINTENANCE (M1010) (Con’t). NOTE Perform step 4 only if brackets (4, 6, or 16) or mounting hardware were removed, 4 . Install lower rear bracket (6) with 2 bolts (7). Install upper rear bracket (4) on intake manifold studs (5) with 2 nuts (3). Install lower front bracket (16) on water pump studs (2) with bolt (15) and 2 nuts (1). Tighten bolts (7) and nuts (3) to 35 Ib.-ft. (47 N.m). Tighten bolt (15) and nuts (1) to 25 Ib.-ft. (34 N.m). 5. Install compressor assembly (14), front adjusting bracket (11), and rear adjusting bracket (9) with pivot nut (12), 5 bolts (8), and 3 adjusting bolts (10). 6. Connect electrical connector to compressor assembly (14). Install clip retaining electrical connector with new Iockwasher and bolt. TA50461 10-98

Privacy Statement
Press Release
Contact