TM 9-2320-289-34
10-25. AIR CONDITIONER LINES REPLACEMENT (M1010),
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
l Air conditioning system discharged.
• One Iockwasher
(See paragraph 10-21)
l Two locknuts
l Four preformed packing inserts
l Two tie-down straps
(Item 63, Appendix B)
a .
REMOVAL
CAUTION
Ensure that all openings and connections are immediately plugged after
disconnection to prevent contamination of air conditioning system.
NOTE
• If removing air conditioner line assembly (16), perform steps 1-3.
l If removing inlet line (4) or outlet line (3), perform steps 2, 4, and 5,
1 .
Remove bolt (18) and Iockwasher (17), and disconnect air conditioner line assembly (16) from
compressor (5). Discard Iockwasher.
2 .
Disconnect
air
conditioner
line
assembly (16) from inlet line (4) and
outlet line (3) at rear of cab. Remove
and discard 2 preformed packing
inserts (8) from inlet line and outlet
line.
3 .
Remove nut (10), bolt (7), and clip
(9) from frame crossmember (6).
Remove 2 locknuts (15), washers
(14), compressor hose washers (13),
and clips (12) from 2 bolts (11) on
underside
o f c a b.
Remove air
conditioner
line
assembly (16),
Discard locknuts.
4 .
Disconnect inlet line (4) and outlet
line (3) from air conditioner assembly
(1).
Remove
and
d i s c a r d 2
preformed packing inserts (2).
TA50462
10-100
