TM 9-2320-289-34
10-19. PERSONNEL HEATER CONTROL BOX REPAIR (M1010) (Con’t).
9
.
1
0 .
1
1 .
1
2 .
1
3 .
Mark relationship of cables (24) to
clamps (32). Remove 2 screws (31)
and clamps from cover (2).
Remove 2 sheet spring nuts (27) and
cables (24) from blend air door lever
(28) and fresh air door lever (34).
Discard sheet spring nuts.
Remove 2 screws (29) and knobs
(30) from blend air door lever (28)
and fresh air door lever (34) if
damaged.
Remove nut (33), 2 washers (25),
screw (26), and blend air door lever
(28) .
Remove fastener (35) and fresh air
door lever (34).
b .
ASSEMBLY
1 .
Install fresh air door lever (34) with
fastener (35).
2.
Install blend air door lever (28) with
screw (26), 2 washers (25), and nut
(33) .
3 .
Install 2 knobs (30) on blend air door
lever (28) and fresh air door lever
(34) with 2 screws (29) if removed.
4.
Install 2 cables (24) on blend air door
lever (28) and fresh air door lever
(34) with 2 new sheet spring nuts
(27) .
5 .
Install 2 clamps (32) on cover (2) with
2 screws (31),
6 .
Install socket (17), nut, bulb, and pilot cover on cover (2).
7 .
Install 2 sensitive switches (15) on cover (2) with 4 screws (14) and nuts (16). Install 2 leads
(13) on sensitive switches.
TA50439
10-70
