TM 9-2320-289-34
3-4. INTAKE MANIFOLD REMOVAL (Con’t).
4.
Remove long bolt (1 O), 7 short bolts (9), 4 long studs (5), and 4 short studs (11). Move fuel
injector pipe clips (12) clear of intake manifold (8). Remove intake manifold and 2 gaskets
(13). Discard gaskets.
b . C L E A N I N G
CAUTION
Clean rags should be placed in cylinder head (14) openings before
cleaning. Ensure that old gasket material does not fall into cylinder head
during clearing. Failure to follow this caution may result in damage to
engine.
1.
Clean all gasket material from mating surfaces of intake manifold (8) and cylinder head (14).
2.
Cover cylinder head (14) openings with manifold covers.
TA50622
3 - 9
