TM 9-2320-289-34
3-4. INTAKE MANIFOLD REMOVAL.
This task covers:
a, Removal
b. Cleaning
INITIAL SETUP:
Equipment Condition
ToolslTest Equipment
l Both battery negative cables disconnected
l TWO manifold covers, J-29664-1
(if being performed in truck).
(See TM 9-2320-289-20)
Manual References
. Crankcase depression regulator valve
l TM 9-2320-289-20
assembly and hoses removed (if being
performed in truck). (See TM 9-2320-289-20)
a. REMOVAL
NOTE
Step 1 applies to all except M1010.
1.
Remove bolt (2), nut (4), and brace (3) from left side alternator bracket (1) and long stud (5).
NOTE
Ensure that position of vacuum pump (7) is noted before rotating.
2.
Loosen bolt (6) and rotate vacuum pump (7) to allow access to rear intake manifold bolt.
3.
Disconnect 2 fuel filter hoses.
T A 6 0 6 21
3 - 8
