TM 9-2320-289-34
3-3. ENGINE AND ENGINE MOUNT REMOVAL (Con’t).
NOTE
Mark relationship of flywheel (9) to
torque
converter
(8)
for
installation.
2.
Remove 6 bolts (4) and torque
converter cover (6) from trans-
mission
a s s e m b l y ( 5 ) . R o t a te
flywheel and remove 6 bolts (7).
3.
Remove 3 nuts (14), washers (13), and springs (12) and disconnect exhaust pipe from
exhaust manifold (11). Repeat for other exhaust manifold.
4.
Disconnect transmission oil cooler pipes (1 O) at engine oil pan clip (15).
TA50617
3 - 4
