10-9. CAB HEATER DEFROSTER DUCT REPLACEMENT

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
799

TM 9-2320-289-34 10-9. CAB HEATER DEFROSTER DUCT REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Condition • Instrument pad assembly removed. (See TM 9-2320-289-20) • Rear battery box removed (if truck is equipped with winterization kits), (See TM 9-2320-289-20) • Heater assembly removed, (See TM 9-2320-289-20) a . REMOVAL 1 . Remove 2 screws (3) and retainers (1), Remove defroster duct (6) through instrument panel compartment opening (5). 2 . Remove 2 “U” nuts (2) if damaged and discard. b. INSTALLATION 1 . Install 2 new “ U“ nuts (2) to defroster duct (6) if removed. 2 . Install defroster duct (6) through instrument panel compartment opening (5) and secure to instrument panel assembly (4) with 2 screws (3) and retainers (1). TA50413 Change 2 10-33

Privacy Statement
Press Release
Contact