TM 9-2320-289-34
10-11. CARGO BODY PICKUP BOX MAINTENANCE (Con’t).
b.
DISASSEMBLY
1.
2 .
3 .
4 .
5 .
6 .
7.
8 .
9 .
10-38 CHANGE 2
WARNING
Use caution when handling sheet metal. Sheet metal has numerous sharp
edges and splinters. Failure to follow this warning may result in injury to
personnel.
NOTE
Left and right body side panels (11) and wheel house panels (19) are
disassembled the same way.
If removing wheel house panel (19), perform steps 2 through 4, 11, and
12.
If removing side panel (11), perform steps 1, 3 through 9, and 12.
If removing front panel (6), perform steps 6, 10, and 12.
If removing rear fenders (M1028A2 and M1028A3), perform steps 3, 9.1,
and 9.2.
Remove 4 bolts (21) and remove side panel shield (22),
Remove 3 nuts (23) and 4 bolts (20) from wheel house panel (19) and floor panel (18).
Remove bolt (31) and body side panel brace (30).
Remove 8 bolts (12) from wheel house panel (19) to body side panel (11).
Remove 4 bolts (17). Grind or cut 2 welds (16) at rear stake pocket (13) and floor panel (18),
and 2 welds (14) at rear stake pocket and rear floor sill (15),
Remove 4 bolts (7) from front of body side panel (11) to front panel (6). If removing front panel,
remove 4 bolts from front of other body side panel.
Remove 6 bolts (10) from floor panel (18) and body side panel (11).
Break sealing compound that seals body side panel (11) and floor panel (18), and remove body
side panel.
Remove 2 plugs (8) from body side panel (11).
