TM 9-2320-289-34
8-2.
STEERING COLUMN MAINTENANCE (Con’t).
NOTE
Ensure that retainer clip (28) snaps into steering column (9) and lower
bearing retainer (29) slots.
12.
Install washer (33), spring (32), lower bearing (27), and adapter assembly (31) into bottom of
steering column (9), Hold adapter in place and install lower bearing retainer (29), indexing
slots in steering column with slots in lower bearing retainer, and install retainer clip (28),
13.
Install back-up light switch (30) tabs into steering column (9).
14.
15.
16.
Slide steering shaft (10) into steering
column (9) and install upper bearing
thrust washer (19).
Install transmission gearshift lever
(13) and pivot pin (14) to steering
column (9).
Remove steering column (9) from
vise.
TA50480
8 - 11
