TM 9-2320-289-34
6-1.
CONSTANT VELOCITY JOINT REPAIR (Con’t).
2. Position new universal joint (8) in front
propeller shaft yoke (1) and press in
2 new bearing cups (7). Install 2 new
retainer clips (3) and fully seat in
bearing cup grooves.
NOTE
There are 2 springs provided in constant velocity ball kit. Shorter spring
(13) is to be used.
3. Lubricate all constant velocity replacement parts with grease provided in kit. In clean centering
ball socket (14) in front propeller shaft yoke (1) install in the following order: spring (13), small
O.D. washer (1 2), 3 ball seats (11) with largest opening outward to receive centering ball, and
large O.D. washer (10).
TA50509
6-4
