TM 9-2320-289-34
5-21.
TRANSFER CASE MAINTENANCE (ALL EXCEPT M1028A1 AND M1031)
(Con’t).
12.
Remove retainer ring (51) at
washer (54) at drive sprocket
13.
14.
driven sprocket (52). Remove retainer ring (53) and thrust
( 5 5 ) .
NOTE
Roller bearings (58) may fall out of drive sprocket (55) when drive
sprocket is removed. There are
present,
Evenly lift on drive (55) and driven
(52) sprockets and remove with drive
chain (56), as an assembly. Remove
sprockets from drive chain.
NOTE
Transfer
cases
manufactured
before July 1, 1983 (as stamped
on identification plate) have no
straight pin.
Remove straight pin from mainshaft
(39). Remove
2
rows
of
drive
sprocket roller bearings (58), if they
did not already fall out, and 3 spacers
(57) .
120 roller bearings. Ensure that all are
5-139
