TM 9-2320-289-34
5-21.
TRANSFER CASE MAINTENANCE (ALL EXCEPT M1028A1 AND M1031)
(Con’t).
1 5.
Remove front output shaft (33).
Remove thick thrust washer (61),
thrust bearing (60), and thin thrust
washer (59),
16.
Remove synchronizer sleeve (64),
mode fork (63), and mode fork
retainer (62) as a unit. Remove mode
fork retainer from mode fork.
17.
Remove
mode
fork
(63)
from
synchronizer sleeve (64). Remove
shift rail (47).
NOTE
Position of synchronizer hub (65)
should be noted for assembly,
18 .
Remove
mainshaft
(39)
and
synchronizer hub (65) as a unit.
Remove retainer ring from underside
of
synchronizer
hub.
Remove
synchronizer hub from mainshaft.
TA50316
5-140
