TM 9-2320-289-34
5-7.
TRANSMISSION CONTROL VALVE ASSEMBLY AND DETENT SOLENOID
MAINTENANCE (Con’t).
e.
INSTALLATION
NOTE
l If installing detent roller and
spring assembly (2), perform
step 8.
l If installing
detent solenoid
(12), perform steps 3 and 9.
l If transmission is in truck,
petrolatum should be applied to
check balls (15) to retain them.
1 .
Install 6 check balls (15) in ball seat
pockets in transmission case.
NOTE
Case
gasket
should
not
be
confused with control valve spacer
plate (14). Case gasket is marked
“ c .”
2. Aline new case gasket and control
valve spacer plate (14) and install
with case gasket against transmission
case.
3. Install new detent solenoid gasket and
detent solenoid (12) with 2 screws
(13). DO NOT fully tighten screws.
NOTE
Control valve body gasket is
marked with a “V.”
4. Install new control valve body gasket.
5-36
