TM 9-2320-289-34
5-8.
TRANSMISSION PARKING LOCK REPLACEMENT.
This task covers:
a.
Removal
c. Installation
b. Inspection
INITIAL SETUP:
Equipment Condition
Materials/Parts
l Detent roller and spring assembly removed.
l One cup plug
(See paragraph 5-7)
• One manual shaft seal
l RTV sealant (Item 57, Appendix B)
Tools/Test Equipment
l Torque adapter
l 3/8 in. O.D. rod
l 3/4 in. O.D. rod
l Torque wrench
a.
REMOVAL
1.
Remove nut and transmission lever from manual shaft (1).
2.
Remove pin (6) securing manual shaft (1) to transmission case, If procedure is being
performed with transmission in truck, bend pin to remove it.
3.
Loosen jamnut (7). Remove inside detent lever (2) from manual shaft (1). Remove jamnut and
manual shaft.
5 - 39
