TM 9-2320-289-34
4-9.1.
REAR FENDER WIRING HARNESS REPLACEMENT (M1028A2).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
l Rear fender side marker lights removed.
(See TM 9-2330-289-20).
l Taillight and lamps removed.
(See TM 9-2320-289-20)
a.
REMOVAL
NOTE
Rear fender wiring harness is removed from both sides in same manner.
1.
Remove 14 bolts (12), 1 nut (13), and inner filler panel (11).
2.
Disconnect rear fender wiring harness (8) from rear lamp wiring harness (7).
3.
Remove screw (5) and disconnect ground wire (6).
4,
Remove 2 nuts (1), washers (2), bolts (4), and shields (10) from inner fender (9).
Change 1
4-68.1
