TM 9-2320-289-34
4-9.
TAILLIGHT WIRING HARNESS REPLACEMENT (M1010 AND M1031) (Con’t).
2.
Disconnect taillight wiring harness (4) connectors from taillight connectors (5). Remove screw
(8) and starwasher (7), and disconnect ground lead (6) from frame (1). Discard starwasher.
3.
Disconnect taillight wiring harness (4) from body wiring harness (9). Unsnap taillight wiring
harness from frame rail (10) and remove.
b.
INSTALLATION
NOTE
• Perform steps 1 and 2 if installing taillight wiring harness (4) on M1031.
l Ensure that all connectors are seated and locked in place as they are
installed.
1.
Snap taillight wiring harness (4) to frame rail (10). Connect taillight wiring harness to body
wiring harness (9).
2.
Connect ground lead (6) to frame (1) with new starwasher (7) and screw (8). Connect taillight
wiring harness (4) connectors to taillight connectors (5).
TA50834
4 - 6 7
