TM 9-2320-289-34
4-6.
INSTRUMENT PANEL WIRING HARNESS AND EXTENSION REPLACEMENT
(con’t).
11.
Apply grease to sealing surfaces of
fuse box (22). Install fuse box with
bolt (31) and 2 screws (30). Install
turn signal flasher.
12.
Inside engine compartment, connect
wiring harnesses to rear of fuse box
(22) .
13.
At lower part of steering column (1), connect directional signal connector (27), ignition switch
connector (28), back-up light switch connector (26), and dimmer switch connector (29).
14.
Install wiring harness terminal (18) and ground lead (17) with screw (16).
15.
Install horn rectifier (21) if removed. Connect headlight switch connector (14), 2 blackout light
switch connectors (15), and horn relay (20).
TA50819
4-51
