TM 9-2320-289-34
4-7.
FRONT WIRING HARNESS REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
l
l
l
l
Front battery~ removed.
l Two Iockwashers
(See TM 9-2320-289-20)
l Three starwashers
Front battery box removed (if truck is
l Tie-down straps (as needed)
equipped with winterization kits).
(Item 63, Appendix B)
(See TM 9-2320-289-20)
Radiator grille removed.
(See TM 9-2320-289-20)
Front blackout marker lights removed.
(See TM 9-2320-289-20)
a .
R E M O V A L
1.
Remove bolt and disconnect fuse box connector (1) from rear of fuse box. Separate f rent
wiring harness connectors from fuse box connector assembly.
2.
Open clips retaining front wiring harness (2) to left fenderwell (4).
3.
Cut and discard tie-down straps retaining front wiring harness (2) to windshield washer hose.
Loosen screws securing washer solvent container (3) and pull front wiring harness free.
TA50821
4-53
