4-6. INSTRUMENT PANEL WIRING HARNESS AND EXTENSION REPLACEMENT (Cont)

4-6. INSTRUMENT PANEL WIRING HARNESS AND EXTENSION REPLACEMENT (Cont) - TM-9-2320-289-34_307

4-6. INSTRUMENT PANEL WIRING HARNESS AND EXTENSION REPLACEMENT (Cont) - TM-9-2320-289-34_309

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
291

TM 9-2320-289-34 4-6. INSTRUMENT PANEL WIRING HARNESS AND EXTENSION REPLACEMENT (Con’t). 5. Raise steering column (1), and install support (37) with 2 washers (38) and nuts (39). 6. Connect leads to accelerator bracket and seatbelt retractor connector. 7. Push transfer case connector (33) lead through floor and connect to 4-wheel drive switch (34), Install transfer case connector lead to transfer case control lever reinforcement (36) with tape (35). 8. Connect courtesy light connector (32) . TA50816 4-48

Privacy Statement
Press Release
Contact