TM 9-2320-289-34
4-7.
FRONT WIRING HARNESS REPLACEMENT (Con’t).
CAUTION
Care should be taken during removal of front wiring harness (2) to prevent
snagging it. Failure to follow this caution may result in damage to front
wiring harness.
NOTE
Ensure that position of front wiring harness (2) is noted for installation.
10.
Open clips retaining front wiring harness (2) to radiator support. Remove front wiring harness.
b.
INSTALLATION
NOTE
Ensure that all connectors are seated and locked in place as they are
installed.
1.
Route front wiring harness (2) through radiator support into engine compartment. Install front
wiring harness into clips along radiator support.
2 .
Connect low coolant sensor connector (26) to low coolant sensor (27). Connect headlight
connector (28), parking light connector (25), and marker light connector (24).
TA50824
4-56
