TM 9-2320-289-2011-31. SIDE, WHEEL HOUSE, AND FLOOR INSULATORS REPLACEMENT (M1009)(Con’t).b.INSTALLATION• If installingand 9.• If installingNOTEfront and floor insulators (17 and 22), perform steps 1-4,side and rear floor insulators (6 and 12) and molding (13),1.2.3.4.5.6.7.8.9.10.11.12.- . .perform steps 5-9.• If installing wheel house Insulators (1), perform steps 10 and 11.Apply RTV sealant to 2 bolts (21), Install f rent insulator (17) with bolts, washers (20), and nuts(19).NOTEOpen and close endgate before securing floor insulator (22) to checkclearance at endgate.Place floor insulator (22) in cargo compartment, alining holes in floor insulator with holes infloor of truck.Apply RTV sealant to 4 bolts (23), Install 4 bolts, 8 washers (15), and 4 new locknuts (16).Install 4 screws (18) at front edge of floor insulator (22).Install 6 brackets (10) to 2 side insulators (6) with 12 screws (9) if removed.Install 2 side insulators (6) with 6 bolts (8), 12 washers (7), and 6 new locknuts (11).Install 2 brackets (5) to 2 rear floor insulators (12) with 4 screws (4).Install 2 brackets (5) to 2 side insulators (6) with 4 screws (4).Install molding (13) with 6 screws (14).Position 2 wheel house insulators (1) over wheel housings.Install 10 brackets (3) with 40 screws (2).Install spare tire carrier and spare tire.FOLLOW-ON TASKS:• Install rear seat. (See paragraph 10-23)11-115
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
