TM 9-2320-289-20
11-24. CARGO COMPARTMENT HEATER EXHAUST PIPE AND VENTILATOR
REPLACEMENT (M1008 AND M1008A1).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Materlals/Parts
Personnel Required
• One cotter pin
• MOS 63B (2)
• One exhaust pipe gasket
• One Iockwasher
• One vent door gasket
• RTV sealant (Item 41, Appendix C)
General Safety Instructions
• Before attempting to service exhaust system, allow exhaust system to cool.
a.
REMOVAL
WARNING
1.
Before attempting to service any part of exhaust system, allow exhaust
system to cool. Failure to follow this warning will result in serious burns.
• If removing
• If removing
• If removing
NOTE
exhaust components, perform steps 1-3.
strainer element, perform step 4.
ventilator, perform steps 4 and 5.
Remove bolt (4) and Iockwasher (3)
from side panel (2), and disconnect
exhaust pipe (1). Discard lock-
washer.
TA50114
11-89
