b. INSTALLATION - TM-9-2320-289-20

11-24. CARGO COMPARTMENT HEATER EXHAUST PIPE AND VENTILATOR REPLACEMENT (M1008 AND M1008A1)

11-24. CARGO COMPARTMENT HEATER EXHAUST PIPE AND VENTILATOR REPLACEMENT (Ml 008 AND M1008A1 ) (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
698

TM 9-2320-289-20 11-24. CARGO COMPARTMENT HEATER EXHAUST PIPE AND VENTILATOR REPLACEMENT (M1008 AND M1008A1) (Con’t). 2. Remove clamp (5) and disconnect exhaust pipe (1) from adapter (6). 3. Remove 4 bolts (10), retainer (9), g a s k e t ( 8 ), and gasket (7) if damaged. Discard gasket (8). 4. At upper right side of cargo compartment cover insulation, remove 4 screws (11), access door (12), strainer element (13), and gasket (14) from access cover (16). Clean strainer element. Discard strainer element if damaged. Discard gasket. 5. Remove 8 nuts (20), bolts (19), and ventilator (18) from enclosure (17). Remove 2 bolts (15) and access cover (16) from rear door assembly panel (21). Clean old sealant from all components. b. INSTALLATION • If installing • If installing • If installing NOTE ventilator (18), perform steps 1 and 2. strainer element (13), perform step 2. exhaust components, perform steps 3-5. 1. Apply sealant to access cover (16) and install on rear door assembly panel (21) with 2 bolts (15). Apply sealant to ventilator (18) and install on enclosure (17) with 8 bolts (19) and nuts (20). TA50115 11-90

Privacy Statement
Press Release
Contact