TM 9-2320-289-20
11-22. CARGO COMPARTMENT HEATER FUEL LINES REPLACEMENT (M1008 AND
M1008A1) (Con’t).
2.
Open 2 catches and remove heater shield, (See paragraph 11-20, REMOVAL, step 1) Loosen
2 screws (33) and remove cover (31). Open fuel shutoff valve (1). Disconnect lead from
heater.
3.
Move fitting (29) clear of fuel shutoff
valve (1). Hold cargo compartment
heater control in “START” position.
Continue operation until a clean,
steady flow of fuel is obtained, then
shut off cargo compartment heater.
Connect fitting to fuel shutoff valve.
4.
Connect lead to heater.
5.
Connect plastic tube to bleed port
(32), then open bleed port. Hold
cargo compartment heater control in
“START” position. Continue operation
until a clean, steady flow of fuel is
obtained,
then
shut
o f f c a r go
compartment heater. Close bleed
port and remove plastic tube.
6.
Position cover (31) and tighten 2 screws (33). Install heater shield over heater and lock 2
catches in place. (See paragraph 11-20, INSTALLATION, step 4)
TA50109
11-84
