11-25. CARGO COMPARTMENT HEATER AIR INLET REPLACEMENT (M1008 AND M1008A1)

11-24. CARGO COMPARTMENT HEATER EXHAUST PIPE AND VENTILATOR REPLACEMENT (Ml 008 AND M1008A1 ) (Cont)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
700

TM 9-2320-289-20 11-25. CARGO COMPARTMENT HEATER AIR INLET REPLACEMENT (M1008 AND M1008A1). This task covers: a. Removal b. Installation INITIAL SETUP: Materials/Parts Personnel Required • RTV sealant (Item 41, Appendix C) • MOS 63B (2) a. REMOVAL NOTE • If removing air duct hose (3), perform steps 1 and 2. • If removing ventilator 1. Loosen clamp (5) and disconnect air duct hose (3) from ventilator (6). Unbuckle strap (4). 2. Loosen clamp (2). Disconnect air duct hose (3) from air inlet adapter assembly (1). 3. Remove 4 nuts (7), bolts (9), sealant from all components. (8), perform step 3. and ventilator (8) from air inlet adapter assembly (1). Clean old TA50117 11-92

Privacy Statement
Press Release
Contact