TM 9-2320-289-20
11-22. CARGO COMPARTMENT HEATER FUEL LINES REPLACEMENT (M1008 AND
M1008A1) (Con’t).
b.
INSTALLATION
NOTE
Apply pipe sealant to all pipe threads before installation.
1.
Connect fuel hose assembly (27) to
fuel shutoff valve (1), but DO NOT
tighten fitting (29). Feed fuel hose
assembly through cargo bed and
install grommet (28). For M1008A1,
also install grommet (30) on fuel hose
assembly and communications rack.
2.
Position fuel hose assembly (24) along frame (2). Connect fuel hose assembly (27) to fuel
hose assembly (24) and tighten fitting (26). Install 2 clamps (3) on fuel hose assembly (24)
and install on frame with 2 screws (25), new Iockwashers (4), and nuts (5).
3.
Install clamp (8) on fuel hose assembly (24). Position brake line (9), fuel hose assembly, and
wiring harness (22). Install screw (11) through clamp (10) and clamp (8). Install new
Iockwasher (7) and nut (6). Install clamp (23) with new Iockwasher and nut.
4.
Route fuel pipe (12) along bulkhead. Connect fuel pipe (12) to fuel hose assembly (24) and
tighten fitting (21). Connect fuel pipe (12) to tee (13) and tighten fitting (14).
5.
Install nut (20) if removed. Install clamp (18) on fuel pipe (12). Install clamp on frame (2) with
bolt (19).
6.
Install clamp (16) on fuel pipe (12) and coolant heater fuel line (15). Install clamp with bolt
(17).
TA50107
11-82
