TM 9-2320-289-20
11-21. CARGO COMPARTMENT HEATER AND FUEL FILTER MAINTENANCE (M1008
AND M1008A1) (Con’t).
2.
Install inlet adapter (20) on heater (5) with 3 screws (19) if removed. Install ventilator (6) on
heater with clamp (18) and bolt (17). Install screw (33), washer (26), and new locknut (25).
3.
Connect fuel pipe (38) to heater (5) and tighten fitting (37).
4.
Install adapter (42), elbow (34), and fuel shutoff valve (2). Install spacer (36) and fuel filter
(35) assembly with 2 screws (43), 4 washers (40), and 2 new locknuts (39). Connect fuel pipe
(38) to adapter and tighten fitting (41).
5.
Install
6.
Install
Connect control lever (28) to rod and tighten setscrew (31).
outlet adapter (22) with 4 screws (27), Install bracket (29) with 2 screws (30).
rod (32) in ventilator (6) with spring (16), washer (15), and new cotter pin (14).
d.
INSTALLATION
1.
If removed, install adapter (9) to
heater (5) with new cotter pin.
TA50103
1 1 - 77
