b. INSTALLATION - TM-9-2320-289-20

11-11. CAB HEATER EXHAUST PIPE REPLACEMENT (Cont) - TM-9-2320-289-20_674

FOLLOW-ON TASKS - TM-9-2320-289-20_676

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
654

TM 9-2320-289-20 11-11. CAB HEATER EXHAUST PIPE REPLACEMENT (Con’t). b. INSTALLATION NOTE • If installing rear exhaust pipe (6), perform steps 1, 2, and 4. • If installing front exhaust pipe, perform steps 3 and 4. • Perform step 1 for all except M1010. 1. Install rear exhaust pipe (6) on fender (13) with screw (17). Install on frame (9) with screw (14), clip (15), washer (16), and new locknut (10). NOTE Install M1009 rear exhaust pipe (6) on top of engine exhaust pipe (8). install all others below engine exhaust pipe. M1009 uses 2 clamps (11) and M1010 uses 11 clamps, all others use 4 clamps. 2. Position rear exhaust pipe (6), install each clamp (11) around rear exhaust pipe and engine exhaust pipe (8) with screw (12) and new locknut (10). TA50075 11-45

Privacy Statement
Press Release
Contact