TM 9-2320-289-20
11-10. CAB HEATER WIRING HARNESS REPLACEMENT (Con’t).
6.
Plug relay (2) into wiring harness (1) connector. Snap relay and wiring harness connector onto
bracket (10).
7.
Position wiring harness (1) in strap (7) and tighten nut. Install clip (5) on wiring harness and
install with screw (3) and washer (4). Connect 2 wiring harness leads to safety switch (9) and
install 2 nuts (8). Connect wiring harness cable to cab heater control panel assembly (6).
FOLLOW-ON TASKS:
• Install rear battery box, (See paragraph 11-6)
• Check operation of cab heater. (See TM 9-2320-289-10)
TA50071
11-41
