TM 9-2320-289-20
10-13. HEATER ASSEMBLY, HEATER CORE, AND HEATER HOSES REPLACEMENT
(Con’t).
2.
Loosen clamps (4) and disconnect outlet hose (3) from radiator (6) and inlet hose (9) from
crossover pipe (5).
3.
Remove and discard strap (7). Remove hose clip (8) from inner fender and remove inlet and
outlet hoses (3 and 9). Remove hose clip from hoses.
4.
Remove 4 screws and remove instrument panel compartment.
5.
Remove 2 screws (13) and spring retainers (12). Disconnect temperature cable (14) from
temperature shaft (15) and defroster cable (10) from defroster shaft (11).
6.
Remove screw (19) and air outlet
(18) from heater assembly (16) if
damaged.
Remove defroster duct
screw (17) from heater assembly.
TA49958
10-37
