TM 9-2320-289-20
10-11. WINDSHIELD WIPER AND WASHER REPLACEMENT (Con’t).
3.
Remove 6 bolts (23) and Iockwashers (22). Using 10 mm socket, loosen nuts (8) and
disconnect right wiper transmission (4) rod from windshield wiper motor pin (11). Remove
wiper transmission assembly.
Separate left wiper transmission (7) from right wiper
transmission (4) if damaged. Discard Iockwashers.
4.
Disconnect leads from windshield wiper motor (14). Disconnect pump hose (12) and 2 nozzle
hoses (6) from windshield wiper motor.
5.
If ventilator panel was not removed, loosen nuts (8) using 10 mm socket through access hole
in top of bulkhead (9), and disconnect right wiper transmission (4)
motor pin (11).
rod from windshield wiper
TA49955
10-32
