TM 9-2320-289-20
10-11. WINDSHIELD WIPER AND WASHER REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Both battery negative cables disconnected
• Six Iockwashers
(if removing windshield wiper motor).
• One windshield wiper motor gasket
(See paragraph 4-38)
• Grease (Item 26, Appendix C)
Tools/Test Equipment
• 10 mm socket
a.
REMOVAL
NOTE
If removing wiper arms (1), perform step 1.
If removing wiper transmissions, perform steps 1-3.
If removing windshield wiper motor, perform steps 4-6.
If removing hoses and washer solvent container, perform
as required.
steps 7 and 8
1.
Remove wiper blade (2) from wiper arm (1), Remove wiper arm from wiper transmission (4
or 7). Remove insert (3) from wiper blade if damaged.
2.
Remove ventilator panel. (See paragraph 10-3)
TA49954
10-31
