TM 9-2320-289-20
10-3.
VENTILATOR PANEL REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
• Windshield wiper arms removed. (See paragraph 10-11)
a.
REMOVAL
1.
2.
3.
4.
NOTE
If removing washer nozzle (2) only, perform step 1.
Remove 4 bolts (11). Remove 1
screw (3) from each washer nozzle
(2), Remove retainer (4) from each
washer hose (5), and remove each
washer nozzle from ventilator panel
(1).
Remove ventilator panel (1). Remove
2 retainers (6), 3 retainers (7), and 2
retainer nuts (10) as required.
Inspect air inlet screen (12) for dust,
dirt buildup, and damage. If there is
dust,
dirt buildup, or damage,
perform step 4.
Remove 2 bolts (8) and screen
retainers (9). Carefully depress 2
tangs (13) with a flat-bladed tool and
remove air inlet screen (12). Clean
dust or dirt from air inlet screen, or
replace if damaged.
b . I N S T A L L A T I O N
If
NOTE
installing washer nozzle (2) only, perform step 3.
1.
Position air inlet screen (12) and snap 2 tangs (13) into place.
with 2 bolts (8).
2.
Install 2 retainer nuts (10), 3 retainers (7), and 2 retainers (6)
panel (1).
Install 2 screen retainers (9)
if removed. Install ventilator
3.
Install each washer hose (5) with retainer (4). Install each washer nozzle (2) with 1 screw (3),
Install 4 bolts (11).
TA49930
10-4
