TM 9-2320-289-20
9-9.
REAR BUMPER SUPPORTS REPLACEMENT (M1009) (Con’t).
7.
Install bumper brace (16) with 2 bolts (15), new Iockwashers (4), and nuts (3), Install wiring
harness to bumper brace with new plastic tie. DO NOT fully tighten nuts.
8.
Install reinforcement (24) with 4 bolts (25), 8 washers (9), and 4 nuts (8). DO NOT fully tighten
nuts.
9.
Tighten nuts (3, 8, 14, 23, 27, 29, and 30) and locknut (17) to 55 Ib.-ft. (75 N•m).
FOLLOW-ON TASKS:
• Install rear bumper, tow hook bracket, and tie-down clevises. (See paragraph 9-8)
TA49715
9-22
