TM 9-2320-289-20
9-9.
REAR BUMPER SUPPORTS REPLACEMENT (M1009) (Con’t).
2.
Install tow hook reinforcement bracket (11) and tie-down extension (20) at tie-down clevis
bracket (12) with bolt (10) and new locknut (17). DO NOT fully tighten locknut.
3.
Position bumper brace (6) between frame and tow hook reinforcement bracket (11) and install
bolt (19), new Iockwasher (26), and nut (27). DO NOT fully tighten nut.
4.
Install bolt (18), new Iockwasher (28), and nut (29), DO NOT fully tighten nut.
5.
Install bolt (5), washer (21), new Iockwasher (22), and nut (23). DO NOT fully tighten nut.
6.
Install stud (7), engage torque rod on stud, and install new Iockwasher (1) and nut (30). DO
NOT fully tighten nut.
TA49714
9-21
