TM 9-2320-289-20
10-2.
RADIATOR GRILLE AND FRONT END PANEL MOLDING REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
• Headlight bezels removed. (See paragraph 4-24)
a.
REMOVAL
NOTE
• If removing radiator grille (1), perform steps 1 and 2.
• Center screw (3) is removed from behind front bumper.
1.
Remove 5 screws (5) and 3 screws (3). Remove radiator grille (1) from behind radiator grille
guard (6).
TA49928
10-2
