3-31. RADIATOR AND FAN SHROUD REPLACEMENT (Cont)

3-31. RADIATOR AND FAN SHROUD REPLACEMENT (Cont

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
206

TM 9-2320-289-20 3-31. RADIATOR AND FAN SHROUD REPLACEMENT (Con’t). 5. Install engine oil cooler lines to right side of radiator (1). 6. Install transmission oil cooler lines (8) to left side of radiator (1). heater assembly hose (10) to right rear of radiator (1). 7. Install upper NOTE Step 8 only applies to trucks equipped with winterization kits. 8. Install engine coolant heater hose (9) to connector at heater assembly hose (10) and tighten clamp (11). 9. Install upper and lower radiator hoses to radiator (1). 10. Install hose support to fan shroud (2), if removed. 11. Install fan shroud (2) with 2 bolts (4) and 4 screws (3). 12. If removed, install clip (6) and bolt (7) at left side of fan shroud (2). 13. Install radiator overflow vent tube (5) to top middle of fan shroud (2). Step 14. Connect engine 15. Install front axle NOTE 14 only applies to trucks equipped with winterization kits. coolant heater hose (9) to top middle of fan shroud (2). vent tube and hose support to top left of fan shroud (2) with bolt. TA49834 3-94

Privacy Statement
Press Release
Contact