TM 9-2320-289-20
3-32.
COOLANT RECOVERY RESERVOIR REPLACEMENT.
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
INITIAL SETUP:
MaterialslParts
General Safety Instructions
One starwasher
Servicing of engine cooling system
should only be performed on a cool
engine.
a.
REMOVAL
WARNING
Servicing of engine cooling system should only be performed on a cool
engine.
Never remove clamp (7) or hose (6) when engine is hot.
Pressurized steam or hot water will cause serious burns.
1.
Position drain pan under coolant reservoir (5). Remove coolant reservoir hose (6) and clamp
(7) from coolant reservoir. Allow coolant to drain from coolant reservoir and coolant reservoir
hose.
2.
Remove drain pan and dispose of coolant.
TA49836
3-96
