TM 9-2320-289-20
3-31.
RADIATOR AND FAN SHROUD REPLACEMENT.
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
INITIAL SETUP:
Equipment Condition
MaterialslParts
Fan and clutch assembly removed.
Antiseize tape (Item 46, Appendix C)
(See paragraph 3-35)
Cooling system drained (if removing
radiator). (See paragraph 3-30)
General Safety Instructions
Servicing of engine cooling system should only be performed on a cool engine.
Compressed air used for cleaning purposes should never exceed 30 psi (207 kPa).
NOTE
Removal of top left screw (3) releases radiator overflow vent tube (5)
from its attachment to fan shroud (2).
If removing fan shroud (2), perform steps 1-7.
1.
Remove 2 bolts (4) and 4 screws (3) securing fan shroud
2.
If installed, remove bolt (7) and clip (6) at left side of fan
(2) to radiator
shroud (2).
(1).
TA49830
3-90
