TM 9-2320-280-34
22-9.4. RIGHT FRONT FLOOR PANEL REPAIR (Cont'd)
g. Right Front Floor Panel and Battery Tray Drilling
1.
Position battery tray (6) on underside of right front floor (1), right front seat support (2), and
tunnel (4).
2.
Using right front seat support (2) as a template, mark twenty-two hole locations (5) on battery
tray (6).
3.
Using right tunnel (4) as a template, mark fifteen hole locations (3) on battery tray (6).
4.
Drill thirty-seven 0.187-in. diameter holes, marked in steps 2 and 3, through battery tray (6).
5.
Locate, mark, and drill two 0.187-in. diameter holes through holddown bracket (7).
6.
Locate, mark, and drill two 0.187-in. diameter holes through holddown bracket (8).
7.
Mark reference lines (10) and (11) on battery tray (6).
8.
Position holddown bracket (8) to reference line (11) on battery tray (6).
9.
Using holddown bracket (8) as a template, locate, mark, and drill two 0.187-in. diameter holes
through battery tray (6).
10.
Install holddown bracket (8) on battery tray (6) with two rivets (9).
11.
Using battery tray (6) as a template, locate, mark, and drill two 0.187-in. diameter holes through
holddown bracket (8).
12.
Position holddown bracket (7) to reference line (10) on battery tray (6).
13.
Using holddown bracket (7) as a template, locate, mark, and drill two 0.187-in. diameter holes
through battery tray (6).
14.
Install holddown bracket (7) on battery tray (6) with two rivets (9).
15.
Using battery tray (6) as a template, locate, mark, and drill two 0.187-in. diameter holes through
holddown bracket (7).
2
1
3
4
5
6
Change 2
