TM 9-2320-280-34
22-9.4. RIGHT FRONT FLOOR PANEL REPAIR (C nt'd )
o
f. Metal Strip C and Insert Panel Assembly
1.
Position metal strip C (2), with arrow facing up and toward metal strip A (5), on insert panel (1).
Align reference lines (4) of metal strip A (5) and C (2) and line (3) with edge of metal strip C (2).
2.
Using metal strip C (2) as a template, locate, mark, and drill eight 0.187-in. diameter holes through
insert panel (1).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (1)
and metal strip C (2).
4.
Position metal strip C (2) on insert panel (1) and install with eight rivets (6).
5.
Remove any adhesive residue and clean edges of metal strip C (2) and insert panel (1).
22-16.62
Change 1
