TM 9-2320-280-34
22-9.4. R IGHT FRONT FLOOR PA NEL REPAIR (C nt'd )
o
e. Metal Strip B and Insert Panel Assembly
1.
Position metal strip B (1), with arrow facing up and toward metal strip A (3), on insert panel (2). Align
reference lines (4) on metal strips A (3) and B (1) and line (5) with edge of metal strip B (1).
2.
Using metal strip B (1) as a template, locate, mark, and drill nine 0.187-in. diameter holes through
insert panel (2).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2)
and metal strip B (1).
4.
Position metal strip B (1) on insert panel (2) and install with nine rivets (6).
5.
Remove any adhesive residue and clean edges of metal strip B (1) and insert panel (2).
22-16.60
Change 1
