TM 9-2320-280-34
22-9.2. LEFT FRONT FLOOR PANEL REPAIR (Cont'd)
e. Metal Strip C and Insert Panel Assembly
1.
Position metal strip C (1), with arrow facing up and toward metal strip A (4) on insert panel (2).
Align reference lines (3).
2.
Using metal strip C (1) as a template, locate, mark, and drill seven 0.187-in. diameter holes in
insert panel (2). Remove metal strip C (1).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2)
and metal strip C (1).
4.
Position metal strip C (1) on insert panel (2) and install with seven rivets (6).
5.
Remove any adhesive residue and clean edges of metal strip C (1) and insert panel (2).
f. Metal Strip D and Insert panel Assembly
1.
Position metal strip D (6), with arrow facing up and toward metal strip A (4), on insert panel (2).
Align reference lines (7).
2.
Using metal strip D (6) as a template, locate, mark, and drill seven 0.187-in. diameter holes
through insert panel (2).
Change 2
