TM 9-2320-280-34
22-9.2. LEFT FRONT FLO OR PANE L REPAIR (C nt'd )
o
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded mating surface of insert
panel (1) and metal strip D (2).
4.
Position metal strip D (2) on insert panel (1) and install with seven rivets (3).
5.
Remove any adhesive residue and clean edges of metal strip D (2) and insert panel (1).
g. Metal Strip B and Insert Panel Assembly
1.
Position metal strip B (6), with arrow facing up and toward metal strip C (5), on insert
panel (1). Align reference line (4) with edge of metal strip B (6).
2.
Using metal strip B (6) as a template, locate, mark, and drill twelve 0.187-in. diameter holes
through insert panel (1).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (1)
and metal strip B (6).
22-16.14
Change 1
