TM 9-2320-280-34
22-9.2. LEFT FRONT FLOOR PANEL REPAIR (C nt'd )
o
7.
Position insert panel (2), with arrow facing down and toward front of vehicle, to underside of left
front floor panel (1).
8.
Obtain a minimum clearance of 0.10 in. between edges of insert panel (2) and left front floor panel (1).
9.
Remove insert panel (2).
d. Metal Strip A and Insert Panel Assembly
1.
Position metal strip A (3), with arrow facing up and left, on insert panel (2). Align reference lines (5)
and (4) with edges of metal strip A (3).
2.
Using metal strip A (3) as a template, locate, mark, and drill thirteen 0.187-in. diameter holes
through insert panel (2).
3.
Apply approximately 0.125-in. thickness of adhesive sealant to shaded surface of insert panel (2)
and metal strip A (3).
4.
Install metal strip A (3) on insert panel (2) with thirteen rivets (6).
5.
Remove adhesive residue and clean edges of metal strip A (3) and insert panel (2).
22-16.10
Change 1
